There are many Foils available.

I will start listing the ones I have access to at this time which includes MFC, BIC and Exocet.

For special order only as no plans to stock any at this time.

Prices shown are in USD $ and CAD $

 

Participating in Windsurf Foiling may result in serious injury or death, to either yourself or those in the water around you. The Windsurf FOIL is a sharp object travelling at high speeds and requires specific safety precautions. You must read, understand and observe the following safety rules when using this product.


 


FOIL MFC ONE7 ALUMINUM FREE RIDE $1414.00
Click Here for Product Details! 2019 - FOIL MFC ONE7 ALUMINUM FREE RIDE - 70cm MAST USD $1414 - 85cm USD $1425 - Developed in our new Carbon Composites Construction and RTM technology using Sicomin G33 BioEpoxy resin. Aluminum Mast has sturdy connections and an economical price. This hydrofoil starts flying with only 6knots of wind. It allows you to interchange front and back wings with our racing wings setup. Available Sizes (CM) > Modular Component System > Mast is 85cm or 70cm Aluminum > Fuselage is 92cm > FreeRide front wing span 80cm=972cm2 > Free ride back wing span 42cm=285cm2 Available Box >Foil Box (Deep Tuttle) Includes > Complete Foil > Padded Bag > Rear Wing Shims > Assembly Hardware
FOIL MFC ONE7 CARBON FREE RIDE $2199.00
Click Here for Product Details! 2019 - MFC ONE7 FREE RIDE HYDRO FOIL CARBON MAST - Includes 94cm Carbon Mast, 92cm Fuselage, 80cm=972cm2 FreeRide Front Wing, 42cm=285cm2 FreeRide Back Wing (Deep Tuttle) MFC ONE7 Hydrofoil is our first all carbon windsurfing hydrofoil. Developed in our new Carbon Composites Construction and RTM technology using Sicomin G33 BioEpoxy resin. This hydrofoil starts flying with only 6 knots of wind. It allows you to interchange front and back wings with our racing wings setup.
FOIL MFC ONE7 RACE $2187.00
Click Here for Product Details! 2019 - ONE7 Race Hydrofoil 78cm Front & 38cm Back 94cm Carbon Mast Complete w/Bag - MFC One7 Hydrofoil is our first all carbon windsurfing hydrofoil. Developed in our new Carbon Composites Construction and RTM technology using Sicomin G33 BioEpoxy resin. This hydrofoil is fast and stable. It allows you to interchange front and back wings with our smaller Racing or larger FreeRide setup. Starts flying with 6 knots of wind. Available Sizes (CM) > Modular Component System > Mast is 94cm > Fuselage is 92cm > Racing front wing span 78cm=709cm2 > Racing back wing span 38cm=235cm2 Available Box >Foil Box (Deep Tuttle) Includes: > Complete Foil > Padded Bag > Rear Wing Shims > Assembly Hardware
FOIL BIC TECHNO 130 $2050.00
Click Here for Product Details! 2019 - CARBON FOIL BIC TECHNO 130 - The BIC Windsurf Foil has been custom-designed for the Techno 130 Foil board, with various objectives in mind : easy accessibility, early take-off, high performance and easy control “in flight”. We have also selected a French manufacturer that uses only “aviation quality” carbon fibre, to ensure maximum rigidity and excellent durability. To achieve those aims, our supplier Foil and Co has chosen a pre-preg carbon fibre compressed under 8 bars of pressure with a high fibre content (65%). This process/combination guarantees unparalleled rigidity and excellent strength. Mast : hollow structure with integral central reinforcement bar, chosen for its high level of rigidity comparable to a solid-section mast, bus very much lighter weight. Fuselage : the fuselage is solid, single section 100% carbon fibre. This enables a rock-solid connection to the front wing and rear stabiliser without risk of deforming under the levering pressure of the mast/wings. Front wing section : this has a relatively thin profile and a wide “gull-wing” shape, giving a large lift-surface. This, combined with a highly efficient rear stabiliser, gives plenty of power and an early take-off, and avoids the risk of stalling at high speed. The Techno foil has great stability at high speed, is efficient up-wind, and is equally comfortable ridden either flat or on a serious angle. It’s a highly forgiving foil that enables beginners to enjoy the foil ride experience quickly and easily, and allows more experienced riders to go much further including competition sailing. Participating in Windsurf Foiling may result in serious injury or death, to either yourself or those in the water around you. The Windsurf FOIL is a sharp object travelling at high speeds and requires specific safety precautions. You must read, understand and observe the following safety rules when using this product.
BOARD EXOCET S LINE PRO $1999.00
Click Here for Product Details! 2019 - EXOCET S LINE PRO - Foil Compatible - Prices in USD $ - Not stocked, special order only - Conflicting information suggests they 125 135 and 145 as well - The S Line is a board range for sailors looking for high end performance associated with great ease of use. The S Line emphasis is on instant planing, high speed & easy maneuvers. The volume distribution and thickness are designed for sailors looking for an increase of volume combined with a fairly narrow width. As a result of the amazing experience of the RS line the S Line Pro will offer high end performance with a great mix of ability in maneuvers due to a deep VEE under the mast foot. The S line comes with top quality footstraps as well as a CNC fin designed by our shaper Jean-Marie Guiriec. • Ideal in flat water freeride & freeslalom conditions • New shape and new rocker line • Really fast on the plane, able to compete against slalom boards • New outline and rail for instant acceleration while keeping perfect control • Equipped with G10 CNC fin • DDSA (Double density shock absorber) • 4 footstraps • Molded semi-custom construction with custom finish • PVC 80 kg/m³ carbon deck • Multiple layers of structural reinforcement on the deck, bottom, and rail Part # Model Size Vol Weight (kg) Fin Sail Size Retail PROGRAM // FREE SLALOM Ideal in flat water freeride & freeslalom conditions FACTS New shape and rocker line Really fast on the plane, able to compete against slalom boards. New outline and rail for instant acceleration while keeping perfect control FEATURES Equipped with G10 CNC fin Double density shock absorber 4 * footstraps DEALER PDF CONSTRUCTION Molded semi-custom Custom finish Construction : 160gr Biax Carbon , 80kg/m3 PVC hull and deck, structural reinforcements on the rails. CARBON SANDWICH LIGHT Unfinished sanded Glass # 60gr Wood & glass # 160gr patch Carbon Bi-axial # 160gr PVC 80 kg/m3 Glass # 60gr SPECIFICATIONS - MODEL S-LINE PRO 115 S-LINE PRO 125 S-LINE PRO 140 VOLUME 115 litres 125 litres 140 litres LENGTH 230 cm 230 cm 230 cm WIDTH 71 cm 76 cm 82 cm WEIGHT TBC TBC TBC FIN Exocet 40 cm Tuttle Foil Box Exocet 46 cm Tuttle Foil Box Exocet 46 cm Tuttle Foil Box SAIL 4.7 – 8.5 m2 5.0 – 9.0 m2 5.5 – 9.5 m2
BOARD EXOCET RF FOIL $1299.00
Click Here for Product Details! 2019 - EXOCET RF FOIL - Pricing in USD $ - not stocked, special order only - - Foiling is big and this board is at the top of the curve. One of the most popular foiling boards ever since its release, this board is perfect for racing and recreational foil windsurfing. The RF 91 and 81 have specific deck and bottom shapes that are designed to make foiling easier for the rider. The round tucked rail running deep to the bottom of the board, the scooped nose, and slight “round vee” help the board land and touch down much softer and without losing speed. The flat deck is designed to have the feet in full contact while the board is railing. The volume is distributed to help foiling with the feet in the footstraps. There are many footstrap options to suit every size and experience rider. • CNC custom contruction for the RF 91 with custom finish • Molded semi-custom construction for the RF 81 with custom finish • AST version: one shot construction • Carbon version: carbon Biaxial 160gr construction on 80kg/m³ • Fiberglass & matt fiber constructio PROGRAM // RACING FOIL & CRUISING Dedicated for foiling in racing or recreational condition, The RF 81 will be displayed in 2 construction carbon and AST FACTS The RF 91 and 81 have specific deck and bottom shape to make foiling easier, Round tucked rail running deep to the bottom shape, the nose shape is built into a slight "round VE" to help the landing and touch down without loosing speed The flat deck shape is design to have the feet in full contact while the board is railing, volume distribution is design to help foiling with feet in the footstraps FEATURES 4 footstraps DEALER PDF CONSTRUCTION Molded semi-custom Custom finish Molded AST CARBON Version: Carbon Biaxial 160gr construction on 80 kg/m3 PVC deck and bottom, multiple structural reinforcement on the rail Fiberglass & matt fiber construction recovered with ASA skin on deck and bottom CARBON SANDWICH LIMITED EDITION Clear coating Glass # 30gr Wood & glass # 160gr patch Carbon Texium 170gr PVC 80 kg/m3 Glass # 60gr CARBON SANDWICH LIGHT Unfinished sanded Glass # 60gr Wood & glass # 160gr patch Carbon Bi-axial # 160gr PVC 80 kg/m3 Glass # 60gr AST ASA sheet Glass # 60gr Wood 0.6mm & Matt # 360gr patch Mat # 360gr Mat # 360gr
BOARD BIC TECHNO FOIL 130 $2050.00
Click Here for Product Details! 2019 - BIC TECHNO FOIL 130 NEW - The brand new TECHNO FOIL is the ideal board for experiencing and enjoying freeride and foil-board riding. Conceived to do both to high level, it enables you to sail in much lighter winds, and to get maximum fun in the widest range of conditions possible. With the foil it’s perfectly balanced and will have you sailing in as little as 10 knots of wind. The foil is wide, making it easy to get up, and to enjoy effortless control of the board itself. Remove the foil and you have a TECHNO that is powerful and very quickly up to planing, extremely responsive and high speed. In this configuration you’ll get the best out of it between 15 and 25 knots of wind. It’s a "convertible" package that will please riders who want the best of both, light-wind foil riding and strong-wind fun. The Techno Wind Foil is 100% Made-in-France using the BIC Sport exclusive ACE-TEC construction technology, resulting in a board with an unrivaled strength/weight ratio. The board was designed by one of the hottest shapers around, Jean-Marie Guiriec. length width Weight volume technology 230 cm 81.5 cm 9.5 kg 130 L ACE-TEC Techno Foil - A rocker line that gives a very smooth ride with maximum control, and a very balanced feel on the water. - A width that facilitates early and easy planing. - Thin rails facilitate easy gybing despite the board’s width. Volume and width ensure that the board powers out of gybes. - Balanced feel makes the board very easy to power upwind. - Softened rails refined for Foil use, also ensure that the board has a very smooth ride over choppier conditions. - Wide wind range from 15-25 knots, ideal with sail sizes from 7m² to 8.5m², perfect when the wind is too strong for comfortable wind foiling. - Max GPS Speeds of 31-33 knots achieved in testing confirm a very sporty ride, fast and comfortable to sail. Key features with foil: -Maximum stability to uphaul the sail and get started in light-wind conditions. - With a maximum width of 81.5cm, and a width carried through to 1-ft from the tail, the board takes-off early and easily. - Comfortable and even drive through the legs once flying. Sailing position balanced with the Foil. - Softened rails in the front 1/3 of the board so that the board sails through touch downs and flies again quickly, with maximum control and safety. - Refined board shape that flies efficiently through the wind, ideal for driving upwind or blasting across the wind. - Full deck pad at the rear of the board for maximum comfort during take-off and foiling. BEST FOR Learning the great sensations of foil riding and progressing your level. FOR WHO Intermediate to advanced level windsurfers interested in a single board they can use from 10 knots of wind with the foil, and without the foil when the wind gets up. SUMMARY The Techno Wind Foil is a super-efficient "2-in1" board, whether you’re using it as a pure light-wind funboard or with the foil. You’re planing incredibly early, and the foil is simple to learn. A high-performance combination that keeps it simple. ACE-TEC Technolohy Windsurf by BIC Sport LIGHT WEIGHT, DURABILITY AND PERFORMANCE: With decades of experience in windsurf and surfboard manufacturing BIC Sport is a pioneer and expert in the field of thermoformed composite construction technology. Over the past few years we’ve refined our ACE-TEC technology for SUP, Surf and Windsurf boards. This unique technology suits the needs of experienced riders and newbies alike with a unique combination of LIGHT WEIGHT, DURABILITY AND PERFORMANCE at a great price. KEY FEATURES: • Molded, light weight and watertight 15 kg/m3 EPS Foam Core. • Fiberglass reinforcement for improved stiffness and performance. • ASA Polymer outer skin for unmatched durability. • Embossed EVA foam pad for maximum comfort. • Molded external inserts – no penetrations through outer shell and maximum strength.
BOARD BIC TECHNO FOIL PRO 130 $3325.00
Click Here for Product Details! 2019 - BIC TECHNO FOIL 130 NEW - The brand new TECHNO FOIL is the ideal board for experiencing and enjoying freeride and foil-board riding. Conceived to do both to high level, it enables you to sail in much lighter winds, and to get maximum fun in the widest range of conditions possible. With the foil it’s perfectly balanced and will have you sailing in as little as 10 knots of wind. The foil is wide, making it easy to get up, and to enjoy effortless control of the board itself. Remove the foil and you have a TECHNO that is powerful and very quickly up to planing, extremely responsive and high speed. In this configuration you’ll get the best out of it between 15 and 25 knots of wind. It’s a "convertible" package that will please riders who want the best of both, light-wind foil riding and strong-wind fun. The Techno Wind Foil is 100% Made-in-France using the BIC Sport exclusive ACE-TEC construction technology, resulting in a board with an unrivaled strength/weight ratio. The board was designed by one of the hottest shapers around, Jean-Marie Guiriec. length width Weight volume technology 230 cm 81.5 cm 9.5 kg 130 L ACE-TEC Techno Foil - A rocker line that gives a very smooth ride with maximum control, and a very balanced feel on the water. - A width that facilitates early and easy planing. - Thin rails facilitate easy gybing despite the board’s width. Volume and width ensure that the board powers out of gybes. - Balanced feel makes the board very easy to power upwind. - Softened rails refined for Foil use, also ensure that the board has a very smooth ride over choppier conditions. - Wide wind range from 15-25 knots, ideal with sail sizes from 7m² to 8.5m², perfect when the wind is too strong for comfortable wind foiling. - Max GPS Speeds of 31-33 knots achieved in testing confirm a very sporty ride, fast and comfortable to sail. Key features with foil: -Maximum stability to uphaul the sail and get started in light-wind conditions. - With a maximum width of 81.5cm, and a width carried through to 1-ft from the tail, the board takes-off early and easily. - Comfortable and even drive through the legs once flying. Sailing position balanced with the Foil. - Softened rails in the front 1/3 of the board so that the board sails through touch downs and flies again quickly, with maximum control and safety. - Refined board shape that flies efficiently through the wind, ideal for driving upwind or blasting across the wind. - Full deck pad at the rear of the board for maximum comfort during take-off and foiling. BEST FOR Learning the great sensations of foil riding and progressing your level. FOR WHO Intermediate to advanced level windsurfers interested in a single board they can use from 10 knots of wind with the foil, and without the foil when the wind gets up. SUMMARY The Techno Wind Foil is a super-efficient "2-in1" board, whether you’re using it as a pure light-wind funboard or with the foil. You’re planing incredibly early, and the foil is simple to learn. A high-performance combination that keeps it simple. ACE-TEC Technolohy Windsurf by BIC Sport LIGHT WEIGHT, DURABILITY AND PERFORMANCE: With decades of experience in windsurf and surfboard manufacturing BIC Sport is a pioneer and expert in the field of thermoformed composite construction technology. Over the past few years we’ve refined our ACE-TEC technology for SUP, Surf and Windsurf boards. This unique technology suits the needs of experienced riders and newbies alike with a unique combination of LIGHT WEIGHT, DURABILITY AND PERFORMANCE at a great price. KEY FEATURES: • Molded, light weight and watertight 15 kg/m3 EPS Foam Core. • Fiberglass reinforcement for improved stiffness and performance. • ASA Polymer outer skin for unmatched durability. • Embossed EVA foam pad for maximum comfort. • Molded external inserts – no penetrations through outer shell and maximum strength.
SAIL AEROTECH AEROFOIL $610.00
Click Here for Product Details! 2019 - AEROTECH SAILS - AEROFOIL - PRICES SHOWN IN USD $ Concept: Foil / Freeride All new for 2019 is the Aerofoil! The perfect sail for the new wave of foiling windsurfing. This 2-cam sail has the perfect power and stability for getting up on to a foil. With Technora paneling on the leech this is one of the lightest cambered sails on the market. This sail performs extremely well both for foiling and freeride blasting. The power of the two cambers combined with light weight Technora leech make for excellent planing power on flat water. This sail rigs well on a RDM mast and is very tunable due to the wide range of outhaul adjustment. Construction: This model features 100% grid construction, a new raised stainless steel 6-1 pulley with oversized rollers, and insignia tape reinforcing, micro cams, rod and tube battens, and the Tack Strap II system. These are some of the lightest weight hassle-free sails available wih Technora paneling on the luff panels. SIZE LUFF (CM) BOOM (CM) BATTENS CAMS MAST WEIGHT (KG) 5.7 435 175 5 2 430/21 TBA 6.5 445 180 5 2 430/21 TBA 7.5 480 195 5 2 460/25 TBA
SAIL SAILWORKS FLYER $584.00
Click Here for Product Details! 2019 - SAILWORKS FLYER - Not Stocked - Special Order Only - Flyer A purpose built 4-batten, twin cam sail optimized for windfoiling Get lifted with the foil specific Flyer. The Sailworks crew is obsessed with foiling and naturally applied Bruce Peterson’s 35 years of sail R&D to create a rig which is at the leading edge of foil sail design. Foiling is so hydro-dynamically efficient that it noticeably reduces the induced-loading effect upon the rig. With a blend of geometric and tension profiles unlike any sail we have ever made before, the FLYER sails are truly unique. Optimized for foiling, the Flyer features low rig tension, a narrow sleeve, four or five battens, and easily rotating twin cams. Foiling gets you windsurfing on days when you couldn’t. We want you to make the most of it. The Flyer 3.9 to 7.0 sails rig easily on our Carbon Twill or Sumo RDM masts that slides easily into the straight luff curve, directly through the cams and settles in the closed top "double-overlap" spectra webbing strap. The 8.2 rigs on our SDM Joystick or Lightstick masts. You can be the last one in the parking lot, but you’ll be the first one flying. We’re stoked to share our foiling experience with you through this high performance, plug & play foil specific rig. Is your foiling package balanced? The key to windfoiling is the correct balancing of all components; foil mast and wing sizes, wing angles, board, footstrap positions, mast track placement and rig balance. Our team of experienced windsurf foilers at Sailworks has not only balanced nearly every combination of foil, board and rig, but they are out testing and tuning different combinations daily. Our expertise is un-matched, and the products we sell are carefully selected and thoroughly tested to provide our customers with the ultimate foiling experience. Call or e-mail us for help creating your balanced foil package to enjoy a plug and play foiling experience: 1-877-639-7245 or orders@sailworks.com.

google-site-verification=o57EFY7M_74nx0AOdTPE9_E4Y4qSPJwF-Cs030tD-DM